Skip to content

Configuration Management

There are two ways to detect configuration changes:

Syslog Triggered

Scheduled

Syslog Triggered

IP Fabric checks incoming syslog messages for key phrase (for example Configured from console by admin15 on vty0.). This option needs proper syslog configuration on the device side.

Syslog server listens on port 514/UDP and there is no additional configuration on the IP Fabric side needed. You can send syslog directly from network devices (example for Cisco IOS) or using syslog forwarder (example for syslog-ng).

Please, note

  • The receiving port 514 cannot be modified.
  • The Syslog messages are filtered and are stored in RabbitMQ apart from the main DB and cannot be observed in IP Fabric's GUI

To enable the syslog triggered configuration management go to Settings → Advanced → Configuration Management → Configuration Management Setup and select Syslogtrigger.

Schedule

Configuration change is checked at regular intervals as configured by user.

Schedule can be enabled and configured at Settings → Advanced → Configuration Management → Configuration Management Setup and select Schedule.

Example

Example for scheduling a check every day at 5:00; 5:30; 10:00; 10:30; 15:00; 15:30; 20:00; 20:30.

configuration managment setup

Multiple values from the lists can be selected with CTRL or SHIFT keys.